Council Workspace

Turn local evidence into a plan.

Compare areas, record outreach priorities and review what changes.

3056 · Brunswick area

Whole ABS Postal Area · Melbourne metropolitan area

CER snapshot 2026-09-30 · Installations 2001-04 to 2026-09 · ABS 2021 Census. Recent installation months in this window are provisional.

Recorded solar is 0.9 kW per dwelling. That is above areas with a similar mix of renters and apartments (0.8 kW) and below the Melbourne metropolitan figure (2 kW).

These figures describe the area, not whether a household can install solar.

Recorded solar capacity per dwelling

Selected Postal Area0.945 kW
Metropolitan benchmark 2.026 kW
279 usable · Gap -1.081
Similar housing mix Active0.803 kW
5 of 5 usable · Gap +0.142
Apartment-weighted housing mix 0.867 kW
5 of 5 usable · Gap +0.078

Gaps show the selected area minus each benchmark.

Export comparison CSV ↓Find local support →
Change this comparison
Place
Comparison
See the workings
Peer groups and council estimates

Similar housing mix · active

Up to five nearest areas by renter and apartment share, equally weighted. Median requires three available outcomes. Benchmark 0.803 kW. 5 of 5 peer areas have a usable outcome.

PeerUptakeRentersApartments
3068 · Fitzroy North area0.867 kW45.6%32.6%
3128 · Box Hill (Vic.) area0.977 kW47.3%38.6%
3055 · Brunswick West area0.72 kW47.7%41.3%
3163 · Carnegie area0.803 kW41.1%37.2%
3031 · Kensington (Vic.) area0.725 kW53.7%39.2%

Apartment-weighted housing mix

Up to five nearest areas by renter and apartment share, with double weight on squared apartment distance. Median requires three available outcomes. Benchmark 0.867 kW. 5 of 5 peer areas have a usable outcome.

PeerUptakeRentersApartments
3068 · Fitzroy North area0.867 kW45.6%32.6%
3128 · Box Hill (Vic.) area0.977 kW47.3%38.6%
3163 · Carnegie area0.803 kW41.1%37.2%
3031 · Kensington (Vic.) area0.725 kW53.7%39.2%
3032 · Ascot Vale area0.9 kW39.4%36.3%

Estimated council allocations

Whole Postal Area numerator 11,961.872 and denominator 12,656. Council estimates below use 2021 Mesh Block dwelling weights.

CouncilDwelling weightEstimated numeratorEstimated denominator
Merri-bek100%11,961.87213,042
Sources and limitations for 2026-09-30-v2
  • CER records certified small-scale systems including upgrades and off-grid systems.
  • An area rate measures recorded capacity divided by dwellings.
  • Postcodes are joined to 2021 ABS Postal Area codes as an approximation.
  • Council uptake numerators are allocated using 2021 Mesh Block dwelling shares.
  • Recent CER installation periods are provisional because certificates can be created up to 12 months later.

Postal Area comparison

Postal AreaSolar capacity
per dwelling
Batteries
per 100 dwellings
RentersApartments
3056 · Brunswick area0.9 kW1.448%34.2%
3043 · Gladstone Park area2.2 kW2.124.7%0.9%
3044 · Pascoe Vale area1.1 kW2.331%4.8%

Solar 2001-04 to 2026-09 · Batteries 2025-07 to 2026-09 · Housing mix from the ABS 2021 Census. Postcodes can cross council boundaries.

Housing and uptake

How do areas compare?

Each dot represents an area. Use the chart to see how recorded uptake varies with housing mix or relative disadvantage.

Solar capacity by renter share

Melbourne metropolitan Postal Areas · 278 shown · 3 missing required values · 11 flagged

  • Selected area
  • Other areas
  • Flagged area
  • Fitted line
051015020406080Fitted linear trendRented dwellings (%)Solar capacity (kW per dwelling)

Hover near a point or tap it to see its area and values.

2D statistics and methods

Pearson r
-0.512Moderate negative association
Uptake quartiles
1.412 / 2.025 / 3.132
Selected area percentile
13.5%

The least-squares line uses the displayed pairs. It requires at least three areas and variation in renter share.

Flagged uptake values sit more than 1.5 interquartile ranges beyond the lower or upper quartile and stay in the fit. Pearson strength is weak below 0.3 and strong from 0.7, using the absolute value of r. The fit describes an area-level association.

Read the plotted values

Possible next steps

Rental provider outreach

Explore support for rented houses and check current program eligibility.

Find rental support →

Shared storage assessment

Investigate community needs, delivery partners and network feasibility.

Suggested pathways support outreach planning. Check household eligibility and technical suitability with program providers.

2021 dwellings with a recorded SRES solar installation

au-solar compares postcode-level CER installation rates with Census housing mix across areas. This fixed Census pilot uses the ABS dwelling-linked solar flag to compare tenure groups within the same area and dwelling structure.

Loading the fixed 2021 pilot…

CER installation records · ABS 2021 Census · Postal Area approximations

Data & methodology

About the evidence

This tool brings area-level installation records together with housing data. It describes places. Individual household tenure and solar access require separate evidence.

CER installation records

Recorded solar capacity and battery installations come from postcode records. Battery coverage starts in July 2025. Recent periods are provisional as certificate claims are completed.

ABS 2021 Census

Renter and apartment shares use the 2021 Census occupied private dwelling totals in G37. Uptake measures use the published G36 private dwelling total, which includes unoccupied dwellings and excludes non-classifiable households from its occupied count. The fixed tenure pilot uses Census dwelling records linked to SRES installation records.

Geography and council estimates

Postal Areas approximate postcodes. For cross-boundary areas, council estimates allocate recorded capacity and installations by the share of 2021 Mesh Block dwellings on each side.

Interpreting the measures

Solar capacity per dwelling is an area ratio. The two automatic rules compare five nearby housing profiles using renter and apartment shares. The alternative gives apartment share twice the weight in the squared distance. Peer comparisons describe area-level associations.

Connect an external MCP client

Use Streamable HTTP at https://loots.dwaq.me/mcp. Try compare_housing_peers with a published release ID and the same area, period and rule as Compare.